SPECIFICATION SHEET
QDE SERIES
RANGE HOOD
A sleek, contemporary styled range hood with high-
performance capability and Energy Star qualification.
TYPICAL SPECIFICATION
Range hood shall be Broan QDE Series.
Unit will have clean, contoured appearance with no sharp
edges. Finish to be baked-on polyester paint (matte finish
stainless steel). It must have a fully-enclosed bottom and
dishwasher-safe, full filters.
FEATURES
•
•
Clean, sleek appearance
Durable, baked-on polyester finish paint or brushed finish
stainless steel
Hood to be convertible between 3¼" x 10" vertical and
horizontal ducted (using two washable aluminum filters).
•
•
Over 50% quieter than the average range hood
Range hood to have a centrifugal blower and (2) 13-watt
(max.) fluorescent lights. Blower and lights shall be operated
using rocker-type controls.
Large, full filter design - dishwasher-safe for easy
cleaning
•
•
Dual fluorescent lights provide lighting for cooktop visibility
(lamps included)
Air delivery shall be no less than 100 cfm and sound level
no greater than 0.9 Sones (280 cfm and 5.5 Sones on High
Speed). Air and sound ratings to be certified by HVI.
Centrifugal blower provides increased performance and
quieter operation.
Unit shall be U.L. and CU.L. listed and Energy Star
qualified.
•
•
Flush-mounted rocker controls
Versatile design allows for 3¼" x 10" vertical and horizontal
ducting
•
Available in 30" width in White, Black, and Stainless Steel
SPECIFICATIONS
Volts
120
HZ
60
Amps
1.2
CFM (Normal)
Max. CFM (High)
Sones (Normal)
Sones (High)
Controls
100
280
0.9
LISTED
5.5
2-sp rocker
CFQ13W/G24q †
Fluorescent Light
† 2 bulbs included.
HVI-2100 certIfIed ratIngs comply with new testing technologies and
procedures prescribed by the Home Ventilating Institute, for off-the-shelf
products, as they are available to consumers. Product performance is rated
at 0.1 in. static pressure, based on tests conducted in a state-of-the-art test
laboratory. sones are a measure of humanly-perceived loudness, based on
laboratory measurements.
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
Date
70M
99044151A
|